Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
5
-
42
Resolving the Card Surface Debris problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Prints have spots (white or colored voids) and/or dust on them
(See sample image below).
• Printer Error State: None
• LCD Error Display: None
• Driver Monitor Error Display: None
2 Ensure the cards are clean and stored in a dust-free environment. Do not use
cards with embedded contaminants in the surface.
3 Clean the inside of the Printer. See Cleaning the Printer's Interior.
4 Clean the Cleaning Roller. See Cleaning the Card Feed and Cleaning Rollers.