Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8
-
29
Replacing the Right End Cap (D900065-01 and –02) (continued)
Steps Procedure
2 a. Grasp the Input Door Assembly (D900073) by the sides with your
thumb and forefinger. Compress the sides of the door by squeezing
your fingers together and then gently pull the door of the Input Cover.
(Note: The Input Door is composed of a durable polycarbonate
material and is able to withstand extreme flexibility before breaking.)
b. Use a No. 2 Phillips screwdriver to remove the following:
• The two (2) screws (130984) that secure the Input Tray
(D900097) and the Right End Cap (D900065-01 and –02) to the
main assembly.
3 Replace the Right End Cap (D900065-01 and –02) to the main assembly.