Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8
-
92
Replacing the Input Pusher (D900104) (continued)
Steps Procedure
4 Remove the Printer Baseplate. See Replacing the Baseplate (D900000).
5 Remove the Flange Bearing (F000350) that connects the Input Pusher
(D900104) to the Card Input Shaft (D900052) and Spring (F000337), as shown
on the next page.
Continued on the next page