Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
16-1
Section 16: Index
A
About button, 6-16
AC - Alternating Current, 15-1
Accepted Card Thickness, 2-3
A
ccepted Card Types, 2-3
Accepted Standard Card Sizes, 2-3
Access Card, 15-1
Adhesion, 15-1
Adjusting the Image Darkness, 5-44, 5-46
Agency Listings, 2-3
Algebraic, 6-21, 15-1
ANSI (American National Standards Institute), 15-1
AS400, 15-1
ASCII (American Standard Code for Information
Interchange), 15-1
ASCII Code, 6-62
ASCII Offset, 6-57
AT, 15-1
automated Flipping Module, 2-15
automated report, 3-1
B
B (Black), 15-1
Barcodes, 15-2
Batch print, 15-2
Battery Back-up, 15-2
Bi-directional, 15-2
BIOS (Basic Input/Output System), 15-2
Bit, 15-2
Bit Density, 6-54
Bit map, 15-2
blocked Sensor, 5-33
Board, 15-2
Boot-up, 15-2
Buffer, 15-2
C
Cable, 15-2
Cache, 15-3
Calibrate tab, 5-36, 5-50, 6-45
Calibrating, 15-3
Cancel button, 2-9
Card Cleaning Roller, 2-9
Card Design, 2-14
Card Feed Roller, 8-50, 8-51, 8-88, 8-89, 8-93, 8-94, 8-
96, 8-97, 8-99, 8-100
Card Feeding Errors, 5-7, 5-8, 5-10, 5-12, 5-15, 5-18,
5-20, 5-22, 5-25, 5-27, 5-29, 5-31, 5-33
card grid, 6-73
card grid area, 6-72
card grid lines, 6-74
card input, 6-107
Card Input Hopper, 2-9
Card Input Hopper Capacity, 2-3
card orientation, 6-75
card output, 6-107
Card Size, 2-14
card stock scratches, 5-41
Card Surface, 2-14
c
ards look pixilated or grainy, 5-53
card's Magnetic Stripe/smart chip, 6-27, 6-39
CD (Compact Disc), 15-3
Centronics, 15-3
Character, 6-62
Character ASCII Offset, 6-57
Character Parity, 6-58
Character Size radio buttons, 6-55
Cleaning Inside Printer, 5-42
Cleaning Roller, 15-3
Cleaning the Printhead, 5-41
Clear Protective Overlay Panel, 2-10
Coercivity, 15-3
Color matching, 15-3
Color Matching, 6-21
Color Matching software, 6-21
Colored Resin, 2-11
Colors, 2-3
Communication Errors, 5-4, 5-5
Compressed air, 15-3
Contrast, 15-3
Contrast / Gamma, printed image, 6-41
Control panel, 15-3
CR-100, 15-4
CR-79, 15-4
CR-80, 15-4
CR-80 card size, front/back, 6-91, 6-92, 6-93
CR-90, 15-4
CSA, 2-2
CSA Certified, 2-2
Cursor, 15-4
customized ID software applications, 6-61
D
Darkness, 15-4
Data Cables, 5-36
DB-9, 15-4
DC (Direct Current), 15-4
DC Motor, 15-4
Default, 15-4
Default button, 6-44, 6-51
default ISO Standard selections, 6-54, 6-58
default location, 6-95
defined area, 6-75
Defined Area arrows, 6-76
Defined area(s), 6-94
Defined Area(s) check box, 6-94, 6-95, 6-96, 6-100, 6-
101, 6-103, 6-104, 6-109, 6-111, 6-112, 6-115
Defined Area(s) option, 6-68, 6-73, 6-92
Defined/undefined area(s), 6-91, 6-93
Defrag, 15-4
Delete button, 6-76
Device Option tab, 5-29
Diagnostic Utility / Diagnostics Tool, 6-12