FARGO electronic DTC300 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
7
-
3
DTC400/DTC300/DTC300M Card Printer/Encoders
Cleaning Kit (Part Number 085976)
Caution: As with any electronic device, internal components of the Printer, such as
the Printhead, may be damaged if exposed to static electrical discharges. To avoid potential
damage, always wear an appropriate personal grounding device, such as a wrist strap (with
integral resistor) connected to an ESD ground.
Supplies (included with the Cleaning Kit)
This Cleaning Kit provides you with the specialized cleaning supplies and the required
cleaning procedures for you to maintain your Fargo DTC400/DTC300/DTC300M Card
Printer/Encoders. The following cleaning procedures will require less than ten minutes. For
more thorough cleaning instructions, please refer to the Cleaning Section in the appropriate
User Guide.
Four (4) Printhead Cleaning Swabs are pre-moistened with 99.99% isopropyl alcohol for
cleaning your Printer’s Printhead.
Ten (10) Gauze Pads are pre-moistened with 99.99% isopropyl alcohol for cleaning your
Printer’s interior and exterior.
Ten (10) Cleaning Cards are provided with adhesive backing for cleaning your Printer’s
Platen and Card Feed Rollers.