Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8
-
28
Replacing the Right End Cap (D900065-01 and –02)
This procedure applies to the DTC400/DTC300/DTC300M Printers.
Refer to Drawings D900147, D900190 and D900151.
Tools Needed: Phillips Head Screwdriver.
Parts Needed: D900066 Rear Cover.
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from
the Printer.
Continued on the next page