Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8
-
65
Replacing the Headlift Motor Assembly (E000806) and the Headlift Cam
(D900075) (continued)
Steps Procedures
6 a. Use a Torx T-10 screwdriver to remove the two (2) screws (F000171) that
secure the Printhead Cam Lever (D900043). See previous page and below.
b. Note the position of the Print Headlift Spring and Cam position.
Continued on the next page