Filter
Top Products
5
5-25
GFK-1004B
Chapter 5 The Station Manager
Table 5-9. Log Event Definitions
Log Event
(Hexadecimal) Cause
1 Powerup. A log entry of this event will appear every time
the Ethernet Interface is restarted or powered up.
2 System events.
8 PLC Driver events.
b Service Agent events.
c LLC events.
11 IP Layer events
12 TCP Layer events
16 ARP Layer events
18 Network Layer events
1b SRTP Server events
1c Channel API
Refer to Chapter 6, Troubleshooting, for information on interpreting the logged events.
LOGIN Command
The LOGIN command has the form:
LOGIN
The LOGIN command will be followed by a prompt of the form:
Password:
You should enter your password (which will not be echoed). If the password matches
the current password for the Modify level, you will receive a confirmation message and
you will be allowed access to the Modify commands. If the password does not match,
then an error message is displayed and the security level is not changed.
Please note that all characters which are typed after the password prompt except for the
Enter key are assumed to be part of the password. Specifically, the delete and backspace
characters do not have their usual meaning and are interpreted simply as password
characters. Passwords are limited to 8 characters and all characters after the eighth are
ignored. Unlike other inputs, the password does not need to be enclosed with double
quotes to achieve case sensitivity.
The factory default password is: system (lower case).
Note
There is a special variation of the LOGIN command that can only be
used in conjunction with the REM (remote) command to login on a
remote system. Refer to the REM command for a discussion of this
variation.