Filter
Top Products
2
2-27
GFK-1004B
Chapter 2 Installing the Ethernet Interface
3. Clear the error log and LLC and MAC tallies in all GE Fanuc test responders in the test.
This step cannot be performed for non–GE Fanuc devices using the Station
Manager.
This step can be done for all Ethernet Interfaces at one time by executing the
following REMote commands:
$ rem 010000000000 login system : Logon to all GE Fanuc stations
$ rem 010000000000 clear log : Clear logs of all GE Fanuc stations
$ rem 010000000000 clear tally : Clear tallies of all GE Fanuc stations
Note
Pressing Ctrl–R will display the last command executed. This is
especially helpful when you are repeating similar commands. Simply
display the previous command, change the desired part of the
command, and press Enter.
This step can be done for individual Ethernet Interfaces by executing the following set of
REMote commands for each Ethernet Interface to be tested.
$ rem <node> login system
$ rem <node> clear log
$ rem <node> clear tally
where <node> is the 12–digit MAC address of the target node.
4. To clear the error log and LLC and MAC tallies in the test initiator Ethernet Interface,
issue the following commands:
$ clear log
$ clear tally
5. Issue the desired TEST command to initiate the network test.
$ test 010000000000 1000 50 256 :Tests all GE Fanuc stations on the
network
or
$ test all 1000 50 256 :Tests all stations on the network
The TEST command causes the test initiator to broadcast 1000 test command frames
of varying lengths and data patterns to all GE Fanuc nodes or all nodes of all types
on the network. All nodes receiving these commands are expected to send a similar
test response back to the initiating node. The initiating node counts all responses
from each responding node.
This command will take about 10 minutes to complete. When the command is com-
plete, a report like the following should be displayed.
<<< Test Results >>> Page 1 of 1
Command: test <<ffffffffffff>> 3e8H 32H 100H ALT
Init Node: <<08001901001f>> Frames sent: 3e8H Nodes responding: 4H
Responding nodes Response recd Response w/err No Response
<<08001901027d>> 3e8H 0H 0H
<<080019010163>> 3e8H 0H 0H
<<080019010043>> 3e8H 0H 0H
<<08001901012c>> 3e8H 0H 0H