Filter
Top Products
E
TCP/IP Ethernet Communications User’s Manual – January 1996E-2
GFK-1004B
Table E-1. GEnet System Manager Data Link Error Codes - Continued
Error Code Description
32 fmalloc error.
34 Deact error.
35 Recv error.
36 LSAP is active.
37 No act confirm.
38 No deact confirm.
39 Deact LSAP error.
40 Act error.
41 Post buffer error.
42 No send confirm.
43 Send error.
44 Programmed I/O timeout er ror.
45 GPIO Ready error. Restart LAN Interface.
46 Invalid LAN Interface type selection.
47-49 Reserved.
50 Error opening GEFNDIS driver.
51 Error closing GEFNDIS driver.
52 GEFNDIS device not open.
53 GEFNDIS driver not bound to MAC driver.
54 Error posting READ to GEFNDIS driver.
55 READ indication error from GEFNDIS driver.
56 Error WRITING TX frame to GEFNDIS driver.
57 WRITE confirm error from GEFNDIS driver.
58 No WRITE confirm from GEFNDIS driver.
59 Error during IOCTL READ to GEFNDIS driver.
60 IOCTL READ confirm error from GEFNDIS driver.
61 No IOCTL READ confirm from GEFNDIS driver.
62 Error during IOCTL WRITE to GEFNDIS driver.
63 IOCTL WRITE confirm error from GEFNDIS driver.
64 No IOCTL WRITE confirm from GEFNDIS driver.
65 NDIS MAC failure (Fatal Error). Restart PC.