Filter
Top Products
3
section level 1
figure bi level 1
table_big level 1
3-1
GFK-1004B
Chapter 3 The GEnet System Manager–Station
Configuration
This chapter describes how to install the GEnet System Manager (GSM), and how to use
it to configure your Ethernet Interface. The chapter includes an overview of the GSM
and a detailed guide to the basic menus that are used in configuring and managing your
Ethernet Interface.
The chapter is divided into 5 sections.
Section 1. Installing and Starting-Up the GSM
Section 2. Configuring a Station for a Basic Network
Section 3. Downloading a Station via the GSM
Section 4. Accessing the Station Manager
Section 5. GSM Support Functions
Note
The GSM is used to maintain a variety of LAN Interfaces. Parts of this
chapter are written so as to reflect this generality. Thus, you may see
occasional references to LAN Interfaces other than the type(s) you use.
a45341
802.3 LAN
TRANSCEIVER
GSM
(LOCAL)
TRANSCEIVER
GSM
(NETWORK)
RS–232 LINK
TRANSCEIVER
SERIES 90–70 PLC WITH
ETHERNET INTERFACE
TRANSCEIVER
SERIES 90–30 PLC WITH
ETHERNET INTERFACE
Figure 3-1. GEnet System Manager (GSM) on 802.3 LAN