Filter
Top Products
178 MFP disassembly/assembly ENWW
Wire lengths
Installing wires
Wire A, C
Wire B, D
182.8±1 mm (Tray 1, 2)
473.1±1 mm (Tray 1, 2)
2.
Install the pulley, pass
wire D through the pulley,
and install the wire
restraining cover and
E-ring.
Wire restraining cover
Pulley
E-ring
Wire C
(black)
Wire D
(white)
5.
Install the wires C and D from
inside the drive shaft hole, push in
the drive pulley, and secure with
E-ring.
4.
Install the pulley, pass
wires C and D, and install
the wire restraining cover
and retaining ring. Wire D
must be inside. Wires must
not cross.
Wire C
(black)
Wire D
(white)
E-ring
7.
Install the wires A and B from
inside the drive shaft hole, push
in the drive pulley, and secure
with E-ring. Next, install the drive
pulley holder.
Wire A
(black)
Wire B
(white)
Drive pulley holder
Drive pulley
E-ring
Wire A
(black)
Wire B (white)
Up/down plate
1.
Pass wire D
through the
up/down plate.
3.
Pass wire C
through the up/down
plate.
Wire C (black)
Wire D (white)
6.
Repeat steps 1 to 4 to install
wire A and wire B.