HP (Hewlett-Packard) 9055 Printer User Manual


 
12 Safety ENWW
The area around the fuser unit is hot.
You may get burned.
WARNING: Work performed with the MFP powered
Be careful when making adjustments or performing
an operation check with the MFP powered on.
If you make adjustments or perform an operation
check with the external cover detached, you may
touch live or high-voltage parts or you may be
caught in moving gears or the timing belt, leading to
a risk of injury.
Be careful when servicing with the external cover
detached.
High-voltage exists around the drum unit. A risk of
electric shock exists.
WARNING: Safety checkpoints
Check the exterior and frame for edges, burrs, and
other damage.
The user or CE may be injured.
Do not allow any metal parts such as clips, staples,
and screws to fall into the MFP.
They can short internal circuits and cause electric
shock or fire.
Check wiring for squeezing and any other damage.
Current can leak, leading to a risk of electric shock
or fire.
When disconnecting connectors, grasp the
connector, not the cable. (Specifically, connectors of
the AC line and high-voltage parts.)
Current can leak, leading to a risk of electric shock
or fire.
CAUTION: Inspection before servicing