Filter
Top Products
52 Finisher unit explanation ENWW
When PS706 (main tray paper exit) has
detected the last sheet and a predefined
time period has elapsed, M711 is
activated again to move the staplers to
the home position, and M711 stops
when PS711 (stapler movement HP)
turns on.
b Single staple (rear, oblique)
The finisher operation signal from the
MFP activates M711 (stapler
movement) to extend the distances
between the two staples as well as the
two clinchers. After a predefined time
period has elapsed, M706 (stapler
rotation) and M704 (clincher rotation)
start to rotate the stapler/R and the
clincher/R respectively. When the
staplers and clinchers are set in place,
M704, M706, and M711 stop.
PS706 (main tray paper exit) turns on
by detecting the last paper, and after a
predefined time has elapsed, M704 and
M706 start to rotate the stapler/R and
the clincher/R back to their home
positions. The rotating actions of the
stapler/R and the clincher/R stop when
PS713 (stapler rotation HP) and PS714
(clincher rotation HP) detect them
respectively. At the same time, M711
starts moving the staplers to the home
position. The operation of M711 stops
when PS711 (stapler movement HP)
turns on.
c Two staples
When two staples are used, the staplers
and the clinchers stay in their home
positions for the stapling operation.
2 Signals
a Finisher CB input signals
1 PS711 IN (PS711 to RB to finisher
CB)
Signal indicating whether the staplers
(/F and /R) are in the home position
[L]: Not in the home position
[H]: In the home position
2 PS713 IN (PS713 to RB to finisher
CB)
Signal indicating whether the
stapler/R is in the home position
[L]: Not in the home position
[H]: In the home position
3 PS714 IN (PS714 to RB to finisher
CB)
Signal indicating whether the
clincher/R is in the home position
[L]: Not in the home position
[H]: In the home position
b Finisher CB output signals
1 M704 DRV A, A
(finisherCB to RB to
M704)
Pulse signal to drive/control the
Phase A of M704
2 M704 DRV B, B (finisherCB to RB to
M704)
Pulse signal to drive/control the
Phase B of M704
3 M706 DRV A, A (finisherCB to RB to
M706)
Pulse signal to drive/control the
Phase A of M706
4 M706 DRV B, B (finisherCB to RB to
M706)
Pulse signal to drive/control the
Phase B of M706
5 M711 DRV A, A (finisherCB to RB to
M711)
Pulse signal to drive/control the
Phase A of M711
6 M711 DRV B, B
(finisherCB to RB to
M711)
Pulse signal to drive/control the
Phase B of M711