Filter
Top Products
72 Finisher disassembly/assembly ENWW
6 Secure the end of a new up/down wire to
the wire end of the up/down pulley/L. Wind
the wire tightly around the up/down
pulley/L approx. 5 turns from inside to
outside. Insert the pulley/L into the shaft
so that the slots on the pulley/L align with
the lock pin on the shaft.
.
7 Hook the up/down wire around the
up/down pulley/U. Wind the wire tightly
around the up/down pulley/L 2 turns from
inside to outside. Secure the end of the
wire to another wire end (outside) of the
up/down pulley/L.
.
8 Insert the pin into the hole in the shaft. Put
the gear into the shaft and fix the gear with
the E-ring.
Longer portion of wire
Up/down stay
Up/down wire
Screw
Wire bracket
Shorter portion of wire
Lock pin
Up/down pulley/L
Inside
Outside
Wire end
(5 turns)
Up/down puller/U
Wire end
Up/down puller/L
(2 turns)
Pin
Gear
E-ring