Filter
Top Products
60 Finisher unit explanation ENWW
3 M720 CLK (finisher CB to RB to
M720)
Signal relating to the clock for
controlling the rotation speed of M720
4 M720 F/R (finisher CB to RB to M720)
Signal to control the rotation direction
of M720
[L]: CW
[H]: CCW
SD706 (tri-folding gate) control
SD706 (tri-folding gate) operates the
tri-folding gate, which provides the
appropriate paper passage for either one of
the three operations: folding, stitch-and-fold,
or tri-folding.
The finisher CB (finisher control board)
controls the operation of SD706.
The related signal is PS725 (folding exit).
1 Operation
When the booklet stopper stops at the
tri-folding position, SD706 (tri-folding gate)
is activated. This operates the tri-folding
gate, providing the paper passage that
leads to the tri-folding stopper.
When PS725 (folding exit) has detected
the trailing edge of the paper and a
predefined time period has elapsed since
then, SD706 is deactivated.
2 Signals
a Finisher CB output signals
1 SD706 CONT (finisher CB to RB to
SD706)
Signal to activate/deactivate SD706
[L]: SD706 on
[H]: SD706 off
5V
PS725 IN
GND
PS725
RB
PS725 IN
SD706 CONT
FNS CBMAIN BODY
SD706 CONT
24V
SD706