Filter
Top Products
ENWW Drive section 41
MFP unit explanation
Drive section
Composition
Mechanisms
*1 Independent drive mechanisms
Drive mechanisms of this machine are
driven by dedicated motors to ensure
high-speed operation and to improve
serviceability of the drum unit and
developing performance.
Speeds of the drum motor (M2), fuser
motor (M4), and loop roller motor (M6)
are switched as shown below according
to the paper type selected in the key
operator mode, thus enhancing
reliability of copying on thick paper.
Scanner motor (M11)
Toner bottle motor (M13)
Drum motor (M2)
Loop roller motor (M6)
Developing motor (M3)
Fixing motor (M4)
Paper feed motor (M1)
Mechanism Driven parts Method
Drum
drive*1
Drum, Toner guide
roller, Toner
conveyance screw,
and Separation claw
swing
Gear drive
(dedicated motor)
Developing
drive*1
Developing sleeve Gear drive
(dedicated motor)
Fuser
drive*1
Fuser roller (upper) Gear drive
(dedicated motor)
Paper feed
drive*1
Tray 2/3/4, Vertical
conveyance roller
(middle/lower)
Gear drive
(dedicated motor) +
Belt
Tray 1/loop
drive*1
Tray 1 feed roller
and ADU
pre-registration roller
Gear drive
(dedicated motor) +
Belt
Scanner
drive*1
Exposure unit,
V-mirror unit
Wire drive
(dedicated motor)+
Belt
Paper exit
drive*1
Paper exit roller Gear drive
(dedicated motor)
Paper type Motor speed
Thick paper 185 mm/s
Others 280 mm/s (9055)
320 mm/s (9065)