Filter
Top Products
http://www.hp.com/go/clj9500mfp
154 Chapter 6 – Control panel menus
Rev. 1.0
COPY/SEND SETTINGS INACTIVITY
TIMEOUT
AUTO SETTINGS
REST
TIMEOUT AFTER
SEND
HOLD OFF PRINT
JOB
HOLD OFF TIME
SCAN AHEAD
AUTO JOB
INTERRUPT
INTERRUPT
COPY JOB
AUDIBLE FEEDBACK
• INACTIVITY TIMEOUT: The amount of time that the copy, send, or fax
settings are kept before resetting to the defined settings. The value
range, in seconds, is 10 to 300, and the default is 60.
• AUTO SETTINGS REST: This option resets the copy, send, and fax settings
when the S
TART button is pressed. The values are OFF and ON, and the
default is OFF.
• TIMEOUT AFTER SEND: The amount of time that a send setting is kept
before resetting to the factory (default) settings. The value range is 10
to 300, and the default is 10.
• HOLD OFF PRINT JOB: If the value is set to ON, the print job will be held
while you are using the MFP control panel.
• HOLD OFF TIME: This value controls how long a print job is held off after
the copy/send job is complete.
• SCAN AHEAD: A copy job can be scanned even if the MFP is printing
another job. The job is scanned and held until it can be printed. If SCAN
AHEAD=OFF, the job will not be scanned until the print job is completed.
• AUTO JOB INTERRUPT: A copy job can automatically interrupt any
currently printing network print job in between the number of full copies
printed. When this item is set to OFF, the copy job waits until the network
print job is completed.
• INTERRUPT COPY JOB: Interrupt the current copy job to make a different
copy. When you press the S
TART button, the MFP presents a message
that asks if you want to interrupt the current copy job. When set to OFF,
the current copy job cannot be interrupted by another copy job.
• AUDIBLE FEEDBACK: Gives an audible indication when a key is pressed or
when you touch an interactive area of the touch screen.
Item Values Explanation