Filter
Top Products
ENWW
Solving MFP problems 295
1
9
The last page did not print and
the Data light is on.
• Make sure that you are using the correct printer driver.
• Complex print job might still be processing.
• The MFP might be waiting for the end of a file command t
hat did not come with
the job. Press S
TART to send it.
• Make sure that the MFP is not paused. Make sure that the PROCESSING JOB
message appears on the control panel.
• Check for a LOAD PAPER message on the MFP control panel. (See “Loading input
trays” on page 10.)
Network or shared MFP problems
occur.
Check for network or shared MFP problems by connecting your computer directly to
the MFP and printing from a software program that you know works correctly. If you
suspect network problems, check with your network administrator or consult the
network documentation that came with your MFP network cards.
The media is loaded into tray 1,
and the load or manual feed
message appears on the control
panel.
Load the correct media in the tray. (See “Loading input trays” on page 10.) If the
correct media is already loaded, press S
TART.
Situation Solution