Filter
Top Products
http://www.hp.com/go/clj9500mfp
12 Chapter 1 – MFP basics
Rev. 1.0
Note
To avoid jams, print sheets of labels one at a time.
4 Adjust the paper guides so they lightly touch the paper stack, but do not
bend the paper. Make sure the paper fits under the tabs on the paper guides
and not above the load level indicators.
5 Look at the control-panel display within a few seconds of loading the paper.
(Remove and reload the media if the time has already elapsed.)
6 If the control panel does not display the message TRAY 1 <TYPE> <SIZE>,
then the tray is ready to use.
7 If the control panel displays TRAY 1 <TYPE> <SIZE>, touch O
K to change the
size and type configuration. The size menu is displayed.
8 Touch A
NY SIZE. The control panel displays SETTING SAVED.
9 Touch A
NY TYPE. The control panel displays SETTING SAVED.
10 If the control panel displays TRAY 1 ANY SIZE ANY TYPE, then the tray is
ready for occasional one-time use for a variety of paper.
11 Touch E
XIT to accept the size and type settings.
4