Filter
Top Products
ENWW
Loading input trays 27
1
1
Changing and setting the media size and type for a tray
You can configure the MFP input trays by type and size. You can load different media in the input trays and then request
media by type or size.
Note If you have used previous HP LaserJet printers or MFPs, you might be accustomed to configuring tray 1 to
first mode or cassette mode. To duplicate the settings for first mode, configure tray 1 for Size = ANYSIZE and
Type = ANY. To duplicate the settings for cassette mode, set either the size or type for tray 1 to a setting other
than ANY.
The following instructions are used to configure the trays at the MFP control panel. You can also configure the trays from
your computer by using the embedded Web server.
To set or change media size for tray 1
1 Press the MENU button.
2 Touch P
APER HANDLING.
3 Touch T
RAY 1 SIZE.
4 Touch the paper size that is loaded.
5 Touch O
K to exit the menus.