Filter
Top Products
ENWW
163
1
7
Custom media size
Custom media sizes are sizes that do not conform to those that are marked in the input trays and that are not listed in the
control-panel menus or in the printer driver.
Note Tray 1. When using custom-size media, select CUSTOM from the Tray 1 Size menu.
Tray 2, tray 3, and the 2,000-sheet side input tray (tray 4). When using custom-size media in these trays,
make sure that the custom/standard switch in the tray is set to Custom.
2,000-sheet side input tray (tray 4). This tray does not support custom-size media.
Dimensions of custom-size media must be typed at the control panel. If you are using tray 1, the Custom menu appears
when you select CUSTOM from the Tray 1 Size menu. If you are using tray 2 or tray 3 the Custom menu appears when you
set the custom/standard switch to Custom and close the tray.
Make sure to type the X dimension and Y dimension of the media. The X dimension is measured from the front of the tray
to the back of the tray. The Y dimension is measured from the left of the tray to the right of the tray.
For more information about setting custom media sizes, see “To set or change a custom size for tray 2 and tray 3” on
page 28.