Filter
Top Products
http://www.hp.com/go/clj9500mfp
224 Chapter 8 – Managing and maintaining
Rev. 1.0
Cleaning procedures
Some print-quality and copy-quality problems can be resolved by cleaning certain MFP components rather than replacing
an MFP part.
Cleaning the ADF
Clean the ADF only if it is visibly marked or dirty, or if you are experiencing a decrease in copy quality (such as streaking).
To clean the glass
• Clean the glass only if dirt is visible, or if you see poor copy quality (such as streaking).
• Clean the glass surface by wiping it gently with a clean, damp, lint-free cloth. Use an ammonia-based surface
cleaner to dampen the cloth.
Caution Do not pour or spray liquids directly onto the glass.
Do not press hard on the glass surface. You might break the glass.