![](http://pdfasset.owneriq.net/6/21/62183e32-8f1d-48f6-afac-2e4b7dcb690b/62183e32-8f1d-48f6-afac-2e4b7dcb690b-bgdb.png)
ENWW
Managing supplies 203
1
8
Replacing the image transfer kit
Use this procedure to install the image transfer kit.
Note
Remove your jewelry, which can snag on parts inside the MFP.
1 Replace the image transfer kit when REPLACE TRANSFER KIT appears on
the control-panel display.
2 If tray 1 is open, remove any paper that is loaded in the tray, and then close
the tray.
3 Open the front doors of the MFP, and then swing the large green lever
down.
2
3
1