Filter
Top Products
ENWW
Cleaning procedures 227
1
8
To clean the top ADF glass strip
If you are still experiencing poor copy quality, you might need to clean the top
ADF glass strip.
CAUTION
Clean this area only if you see copy defects such as streaks, and you notice
dust
inside the glass strip. Cleaning this area frequently could introduce
dust into the MFP.
1 Open the ADF cover.
2 Locate the latch that releases the top ADF glass strip. Push the latch to the
left, and pull down to expose the inside of the glass strip.
3 Gently wipe the glass with a dry, lint-free cloth.
CAUTION
Use dry cloth only in this area. Do not use solvents, cleaners, water, or
compressed air. Doing so could severely damage the MFP.
4 Pull up on the latch to return the glass strip to its normal position.
1
2
4