Filter
Top Products
Menu Item Sub-menu item Sub-menu item Description
Advanced setup Detect dial tone On
Off
Sets whether the product should check for a dial tone before
sending a fax.
Billing codes On
Off
Enables the use of billing codes when set to On. A prompt
will appear that asks you to enter the billing code for an
outgoing fax.
Extension Phone On
Off
When this feature is enabled, the user can press the 1-2-3
buttons on the extension phone to cause the product to
answer an incoming fax call.
Stamp faxes On
Off
Sets product to add the date, time, sender's phone number,
and page number to each page of the faxes that this product
receives.
Private receive On
Off
Setting Private receive to On requires the user to have set
a password in product security. After the password is set,
the following options are set:
●
Private receive is turned on.
●
All old faxes are deleted from memory.
●
Fax forwarding set to Off and is not allowed to be
changed.
●
All incoming faxes are stored in memory.
Fax Number
Confirmation
On
Off
Verify that a fax number is valid by entering it a second time.
Allow Fax Reprint On
Off
Sets whether all received faxes stored in available memory
can be reprinted.
Fax/Tel Ring Time 20
30
40
70
Sets when the product should stop sounding the Fax/Tel
audible ring to notify the user of an incoming voice call.
Fax Speed Fast(V.34)
Medium(V.17)
Slow(V.29)
Increases or decreases the allowed fax communication
speed.
Table 2-5 System setup menu
Menu Item Sub-menu item Sub-menu item Description
Language (List of available
control-panel
display languages.)
Sets the language in which the control panel displays
messages and product reports.
Table 2-4 Fax setup menu (fax models only) (continued)
16 Chapter 2 Control panel ENWW