Filter
Top Products
Define custom copy settings
When you change the copy settings at the control panel, Custom settings appears on the control-panel
display. The custom settings remain in effect for approximately 2 minutes, and then the product returns
to the default settings. To immediately return to the default settings, press Cancel.
Print or copy edge-to-edge
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in),
leaving a 4 mm unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
●
When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the
corner indicated by the icon on the scanner. Recopy or scan in this position.
●
When the original is the size of the desired output, make a copy with smaller edges by using
Reduce/Enlarge to reduce the image.
The edges and the copy are reduced in size by up to 2 mm.
Copy onto media of different types and sizes
The product is set to copy on either letter- or A4-size paper, depending on the country/region in which
it was purchased. You can change the size and type of media that you copy to for the current copy job
or for all copy jobs.
Change the media size and type for the current job
NOTE: Change the default media size and type settings to change the media size and type.
1. On the product control panel, press Copy Features.
-or-
For products with a graphical display, press Copy Menu, then use the arrow keys to select
Options, and then press OK.
2. Use the arrow buttons to select Copy Paper, and then press OK.
3. Use the arrow buttons to select a media size, and then press OK.
4. Use the arrow buttons to select a media type, and then press OK.
5. Press Start Copy.
Change the default media-size setting
1. On the product control panel, press Setup.
2. Use the arrow buttons to select System setup, and then press OK.
3. Use the arrow buttons to select Paper setup, and then press OK.
4. Use the arrow buttons to select Default paper size, and then press OK.
5. Use the arrow buttons to select a media size, and then press OK.
6. Press OK to save the selection.
ENWW Copy settings 79