Filter
Top Products
Before You Install
Installation Guide 11
5 Install the laminator supply material (if the printer has a laminator).
6 Load cards in the input hopper (if the printer
has a hopper).
Do not connect the printer and PC at this
time.
7 Power on the PC or host computer. Make
sure it is fully operational before connecting
the printer.
8 For a printer connected using the built-in
Ethernet port on the printer, connect the
network cable to the printer and to the
network now.
For a printer connected using a USB cable
or a print server, continue with step 9.
9 Power on the printer.
a Connect the power supply to the
printer.
b Connect the power cable to the power
supply.
c Connect the power cable to a facility
power source.
d For printers with laminators,
push the power switch to On.