Filter
Top Products
Before You Install
Installation Guide 12
10 When the printer powers on, the
status light presents a series of
patterns. The location of the status
light depends on the printer model:
11 The status light displays the following:
— Amber when the printer is powered on.
— A series of colors as it initializes.
— The printer status light becomes steady
green when the printer is ready.
For printers connected using a USB cable between the printer and PC, continue with
"Installation on Windows".
For printers connected over a network, continue with "Network Address Settings".
Network Address Settings
The Address Mode determines how the network address of the printer is assigned. The choices
are DHCP and Static IP. DHCP stands for "Dynamic Host Configuration Protocol" and means
that the network assigns the IP Address to the printer. Static IP means that you set the IP
Address assigned by your network support personnel. Network support personnel can tell you
whether the network uses DHCP or static IP addressing.
Locate the Current Address Mode
1 Make sure the printer is connected to the
network using an Ethernet cable and is
powered on.