Filter
Top Products
Before You Install
Installation Guide 14
3 With "Configuration" displayed on Line 1, press
the Up or Down Arrow key to display "DHCP/
Static IP" on Line 2.
4 Press the Enter key. The current Address Mode
value is displayed on Line 2.
5 Press the Up or Down Arrow key to display
DHCP.
6 Press the Enter key.
7 Apply/Restart" appears on Line 2. Press the Enter key to restart the printer.
8 Continue with "Retrieve DHCP Values".
Retrieve DHCP Values
Continue with the following steps after confirming the Address Mode or changing the Address
Mode to DHCP.
1 Begin when the LCD panel shows "Printer Ready" on Line 1 of the display.
2 Enter the Status menu.
— With “Main Menu” displayed on line 1, press
the Up or Down Arrow key to display "Status."
— Press the Enter key to enter the Status menu.
— With "Status Menu" displayed on Line 1,
press the Up or Down Arrow key to display
"Network" on Line 2.
3 Press the Enter key. "Address Mode" appears on
Line 2.
4 Press the Up or Down Arrow key to display IP
Address on Line 2.
5 Press the Enter key to display the IP Address.