Filter
Top Products
Installation on Non-Windows Platforms
Installation Guide 74
Set the Data Format
Before you send any data to the printer, set the data format so the printer can receive the
data you send.
1 Press the Enter key to enter the menu system.
2 Press the Up or Down Arrow key to scroll to “Configuration” and press the Enter key.
3 Press the Up or Down Arrow key to scroll to “Data Format” and press the Enter key.
4 Press the Up or Down Arrow key to display the data format you want on the second line
of the display and press the Enter key.
5 The “Apply/Restart” prompt appears on the second line of the display. Press the Enter
key to confirm the data format choice and restart the printer.
After restarting, the printer is ready to accept data in the format you have chosen.