Filter
Top Products
Before You Install
Installation Guide 16
2 With "Configuration" displayed on Line 1, press
the Up or Down Arrow key to display "IP
Address" on Line 2.
3 Press the Enter key to choose IP Address.
4 The printer shows the current IP Address and a
cursor appears under the first byte of the
address. (The address byte shows three digits
when it can be changed and the cursor appears
under the right-most digit.)
5 Press the Up or Down Arrow key to change the
numbers of the IP Address.
6 When the first byte is correct, press the Enter key
to move to the second byte.
7 Repeat for the third and fourth byte of the IP
Address. After entering the fourth byte of the
address and pressing the Enter key, "Subnet
Mask" appears on Line 2 of the LCD panel.
8 Press the Enter key. The current Subnet Mask
value appears with the cursor under the first byte.
Set the Subnet Mask using the same process as
the IP Address. After entering the fourth byte and
pressing the Enter key, "Gateway Addr" appears.
9 Press the Enter key. The current Gateway
Address value appears with the cursor under the
first byte. Set the Gateway Address using the
same process as the IP Address.
10 After entering the fourth byte of the Gateway
Address and pressing the Enter key, "Apply/
Restart" appears.
11 Press the Enter key to apply the values and
restart the printer.