Filter
Top Products
Removing the 500-Sheet Paper Tray Support Unit (No Duplex Unit)
Use the following procedure to remove the 500-sheet paper tray support unit when no
duplex unit is installed:
1. Switch the printer power off.
2. Unplug the printer from the wall outlet.
3. Remove the power cord from the back of the printer.
4. Unfasten the two locking clips between the printer and the support unit at the back
of the printer. Pinch the locking clips to remove them.
5. Remove the 250-sheet paper tray and then slide the 500-sheet paper tray out until
the two locking clips at the front of the printer are clearly visible.
134 User’s Guide