IBM 63H3111 Printer User Manual


 
3. Press the Item key until you see OUTPUT=
output
* in the display, where
output
is
the current default.
4. Press the Value key until you see OUTPUT=FACE-UP. (The face-up bin must be
installed for this value to appear.)
5. Press the Continue/Enter key to select the new bin. An asterisk appears next to
the value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Note: Values specified in your print jobs override defaults set at the printer. If a print
job requests the main bin, the printer uses it, even if the default bin is set to to the
face-up output bin.
Defining the Auxiliary Tray Paper Size
Situation: You want to define a new paper size for the auxiliary tray.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see AUXSIZE=
size
* in the display, where
size
is the
current default.
4. Press the Value key until you see the new value you want.
5. Press the Continue/Enter key to select the new size. An asterisk appears next to
the value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Defining the Envelope Tray Envelope Size
Situation: You want to define a new envelope size for the optional envelope tray.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see ENVSIZE=
size
* in the display, where
size
is the
current default.
Note: This value appears only if the optional envelope tray is installed.
4. Press the Value key until you see the new value you want.
5. Press the Continue/Enter key to select the new size. An asterisk appears next to
the value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Chapter 3. Paper Handling 47