Filter
Top Products
Loading Postcards into the 80-Sheet Auxiliary Tray
Note
Many applications allow you to specify the input tray you want to use. This value
will override any value set at the printer. If your application does not let you pick an
input tray, use the Paper Menu to select the tray.
To select the 80-sheet auxiliary tray, set SOURCE to AUXTRAY (see “Selecting
The Default Input Tray” on page 46).
Use the following procedure to load postcards into the 80-sheet auxiliary tray:
1. Select postcards using these guidelines:
2. Pull on both sides of the auxiliary tray door to open it.
Note: The tray may be difficult to open at first; if so, use firm pressure to pull it
open.
Postcard size 100 x 148 mm
Postcard weight 190 grams/meter
2
Postcard Capacity Up to 25 postcards
Chapter 3. Paper Handling 35