Filter
Top Products
Once you select an accessor to leave active, the library manager displays the Dual
Active Accessor Status Pop-Up Window. See Figure 57.
Lockup Library Manager
Locks the keyboard and display until the system administrator’s password is
entered.
Shutdown
The Shutdown option prepares the library manager for the power-off procedure. If
the library manager is currently in the Offline state and Pause mode, the volume
database is stopped, files are closed, and the library manager program is ended.
The system administrator password is required to initiate the shutdown procedures
if the password option is chosen. (See “System Administrator Password” on
page 200 for instructions to set the administrator password.)
Select Shutdown from the Mode pull-down or press the F3 key to cause the
System Administrator Password pop-up window to appear. See Figure 58 on
page 109.
Note: This window will only appear if the password option is chosen.
Figure 56. Mark Accessor Active Pop-Up Window
Figure 57. Dual Active Accessor Status Pop-Up Window — Disabling
108 Magstar 3494 Tape Library Operator Guide