Filter
Top Products
LM LAN Information
This window supplies the LAN information about the library that is required by the
host system for the host and library to communicate. The window shown in
Figure 126 displays the following information:
Note: If Model HA1 is installed, information for both library managers is shown. An
asterisk (*) indicates that the item is for the local library manager.
Library Transaction Program Name
Specifies the name of the LAN transaction program that runs on the Library
Manager to receive data from the Host.
Library Network ID
Specifies the name of the remote network in which the adjacent control
point (the Library Manager) resides.
The Common Programming Interface (CPI) - Communications
partner_LU_name of the host, consists of the Library Manager network
identifier and the Library Manager location name. For example, if the
Library Manager partner_LU_name is USIBMSU.LIBMGRC3, then the
Library Manager Network ID is USIBMSU.
Library Location Name
Specifies the remote location name (of the 3494 Library Manager) to which
the Host will communicate.
The Common Programming Interface (CPI) - Communications
partner_LU_name of the Library Manager, consists of the network identifier
and the location name. For example, if the Library Manager
partner_LU_name is USIBMSU.LIBMGRC3, then the Library Manager
Location Name is LIBMGRC3.
Figure 126. Library LAN Information Pop-Up Window
198 Magstar 3494 Tape Library Operator Guide
|