Filter
Top Products
Previously Initialized
This field indicates if the Library Manager has previously been initialized
with this host via LAN.
v 0 in this field indicates the Library Manager has not yet been initialized
with this host.
v 1 in this field indicates the Library Manager is initialized or was
previously initialized with this host.
The LAN Status panel has the following push-buttons:
OK Closes the window.
Help Display the help panel.
Dual Accessor Zones
Figure 79 shows the Dual Accessor Zones window.
The Dual Accessor Zones window displays a diagram showing the string of frames
that make up the library, and indicators showing which frames are serviced by each
accessor. Boundary is the frame number of the frame that is currently serving as
the zone boundary between Accessor A’s work zone and Accessor B’s work Zone.
Mode is the boundary mode (fixed or float). Fixed means the boundary is fixed,
and will not change based on activity. Float means that the boundary will change
automatically based on activity to balance the accessor workload. The default mode
is float.
The Dual Accessor Zones window has the following push-buttons:
OK Closes the Dual Accessor Zones window.
Help Provides help about the Dual Accessor Zones window.
To close the window, select the OK push-button in the lower left corner of the
window.
Figure 79. Dual Accessor Zones Pop-Up Window
136 Magstar 3494 Tape Library Operator Guide