Filter
Top Products
Note: The ERROR indication is caused by the operator pressing F4 on the Action
List screen.
You can only view this screen. You perform the tasks (actions) from the Action List
screen.
Error Processing
Use the following procedure to describe the problem to the host system if you
cannot complete a mount or eject action:
1. Highlight the action item that you cannot complete on the Action List screen.
Use the up or down arrow keys to highlight the questioned action.
2. Press the Error key (F4) on the Action List screen of the library manager.
3. Select the error description that best fits the problem. Use the up or down arrow
keys to highlight the error description. See Figure 147 on page 237.
4. Press the Enter key to send the error description to the host processor.
Note: Press the Cancel key (F12) to replace the Error Processing screen with the
Action List screen. No error message is sent.
Review List
Action VOLSER From To
Mount GKT333 Rack 2 B 40 Device 200 Confirmed
Eject SRJ485 Rack 1 A 7 Confirmed
Mount EPF371 Device 200 Device 3E1 Confirmed
Mount SDR495 Rack 7 A 6 Device 201 ERROR (see Note)
F1=Help F3=HideScreen F12=Cancel
Figure 146. Manual Mode Review List Screen
236 Magstar 3494 Tape Library Operator Guide