Filter
Top Products
Table 42. Status Codes and Status Text (continued)
Operation Status Resolution Actions
Status Code
28
Status Text
Exported Stacked Volume processing error
Probable Cause
On Import, the file on the Exported Stacked
Volume containing the list of logical volumes
stored on the Exported Stacked Volume could
not be read without error.
Suspected media failure, call an IBM Service
Representative.
Status Code
29
Status Text
Orphaned logical volume
Probable Cause
On Export, the VTS storage management code
does not recognize the logical volume volser;
therefore, the logical volume cannot be exported.
Call an IBM Service Representative.
Status Code
30
Status Text
Logical volume assigned to insert category
Probable Cause
For Export, the logical volume is currently
assigned to the insert category. Volumes in the
insert category have not been accepted by a
host and cannot be exported.
1. Check host systems attached to the VTS to insure
that they are processing volumes in the insert
category.
2. If the check above indicates that there is at least one
host which is processing volumes in the insert
category, determine why the specific volume has not
been processed.
Status Code
31
Status Text
Exported Stacked Volume unload failure
Probable Cause
For Import, the Exported Stacked Volume volser
found in the Physical Volume field of the Status
File record was used for importing logical
volumes and could not be demounted from the
tape drive and may not have been returned to
the Import category.
Call an IBM Service Representative.
Appendix B. Virtual Tape Server Import/Export Advanced Function 325
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|