IBM Magstar 3494 Network Card User Manual


 
The following are the push-buttons:
OK Perform the Insert Unlabeled Cartridges
operation.
Help Display the help panel
Cancel Close this panel and cancel the Insert
Unlabeled Cartridges operation.
Next 10 Displays the next ten cells when the optional
30 cell I/O is installed.
Previous 10 Displays the previous ten cells when the
optional 30 cell I/O is installed.
Add LAN Host
This panel allows a LAN attached host to be configured for communication with this
3494. Up to 32 LAN host ports can be configured. The information to be entered
may be available from a command on the host. For example, on the AS/400, the
Display LAN Information (DSPLANMLD) command will provide this information. The
person who set up your LAN configuration may also be able to provide this
information. Figure 118 on page 186 shows the Add LAN Host to Library pop-up
window.
Communication Protocol
Select the type of communication protocol for use with this host.
Each LAN host has a particular LAN protocol that it uses to communicate
with the 3494. Following are some of the hosts and their associated
protocols:
AS/400
uses APPC
Figure 117. Insert Unlabeled Cartridges Window
Chapter 6. Advanced Operating Procedures 185