Filter
Top Products
Locating and Identifying Home Cell Locations
Use the following procedure to locate and identify the home cell locations:
v Determine the home cell in which to place a misplaced or inaccessible volume.
v Determine the home cell so you can find a volume.
1. Press the Locate key (F10) on the Action List screen of the library manager.
See Figure 143 on page 230.
2. Enter the volume to find its home cell and then press the Enter key.
The home cell for the volume is displayed on the Locate Cartridge Home
screen. See Figure 148 on page 238.
3. If you place the volume in the home cell or verify that the volume is already in
the home cell, press the Enter key; otherwise, press the Cancel key (F12).
4. Return to the Action List screen by pressing the Cancel key (F12).
Note: The Locate function works only for physical volumes. Logical volumes do
not have a home cell.
Error Processing
Select the error description that best fits the error situation and press
the Enter key.
Action VOLSER From To
Mount SSG332 Rack2D22 Device 3F5
Error Description...
Rack Cell Empty
Rack Cell In Use
Wrong VOLSER
Device In Use
No Cartridge In Device
Cartridge Not Found
Other Error
F1=Help F3=HideScreen F12=Cancel
Figure 147. Manual Mode Error Processing Screen
Chapter 6. Advanced Operating Procedures 237
|