Filter
Top Products
Note: The display panels shown are examples and may not be exactly the same
as the panels displayed on your library manager display.
Starting Manual Mode
To select Manual mode, perform the following procedures:
1. Select Mode (see Figure 140) from the action bar on the Operator Menu at the
library manager. See “Using the Mode Pull-Down” on page 99.
2. Verify that the 3494 is Online. If Offline, choose Online and confirm the
selection. See “Online” on page 101.
3. Select Manual from the Mode pull-down. See “Manual” on page 101.
4. Select the Yes push-button (see Figure 141) to start the change to Manual
mode.
During the change to Manual mode, a wait period allows the library manager, if
possible, to process all operations in progress, park the cartridge accessor and
Figure 140. Mode Pull-Down Menu
Figure 141. Mode/State Change Request Pop-Up Window
228 Magstar 3494 Tape Library Operator Guide