Filter
Top Products
4 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
2. Structure
- Sorter LiS-752 is optional device.
(1) Supply section
Picks up each sheet of film from the tray unit, and sends
to the descent transport section.
(2) Descent transport section
Sends the picked-up film in the supply section to the
position control section.
(3) Position control section
Aligns the film sent from the descent transport unit hor-
izontally, and sends it to the exposure section.
(4) Exposure section (a: Subscan unit, b: Optical
unit)
Performs a laser scanning in synchronization with the
film transport and prints an image on the film.
(5) Elevator transport section
Sends the film to the HPRO (Heat Processing) section
after the exposure.
(6) HPRO (Heat Processing) section
Processes the exposed film by heating.
(7) Cooling/Discharge section
Cools the heat-processed film and discharges it.
(8) Air-cooling section
Remove the odor generated by heat-processing with a filter.
(9) Electrical control section
Consists of the power supply unit for supplying the power to the
device and the control unit for controlling the entire device,
communicating with the diagnostic devices, and processing /
controlling images.
By installing an optional battery for UPS (uninterruptible power
supply), the system in the control unit can be backed up even
though power failure occurs due to electrical accidents.
(10) Control panel
Operates and makes settings of the device.
(11) Sorter (option)
Discharges the film discharged from the main body into the
specified bin.
(2)
(1)
(10)
(7)
(8)
(6)
(5)
(4)
(9)
(3)
(11)
Ver.0.12 2002.7