Filter
Top Products
5-3.Removing Jam
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 57
(3) While turning the handle further, put your hand into
the discharge section and fold the edge of the film
back.
(4) When the film comes out of the HPRO unit cover
completely, remove it from the cooling/discharge
section.
(5) Tilt the release lever rightward.
(6) Close the front cover.
The normal screen will re-appear after a while when the mes-
sage of "PLEASE WAIT" appears.
When there queued print data remains, printing starts automat-
ically.
Caution on High Temperatures
The temperature around the HPRO section and
the cooling/discharge section may reach 80 °C
(176 °F) or over. Before removing the jammed film,
allow those sections to cool off.
CAUTION
The front cover cannot be closed with the release
lever raised. If you find it hard to close the front
cover, check the position of the release lever.
Do not close the front cover forcibly.