Filter
Top Products
4-3.How To Operate Maintenance Mode
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 19
" Setting Date/Time (TIME SET)
Follow the procedure below to set the date and time for the clock in the device. Set the time zone and the use/
disuse of the summer time depending on the areas in which you use the device. Follow the procedure below to
make settings.
(1) Touch [TIME SET] on the maintenance menu
screen.
The TIME SET screen will appear.
The keys of DATE on the TIME SET screen show the date (D),
month (M), and year (Y) that are currently set.
The keys of TIME show the current time (hour (H) and minute
(M)).
(2) Touch the item key to be changed when setting the
date/time.
The selected key will be highlighted.
(3) Touch [$] / [%] to change the value.
The month (M) key shows each month in abbreviation (JAN to
DEC) every time you touch the [$] / [%] key.
(4) Confirm that "64" is displayed next to TIME ZONE.
"64" is code No. of time zone of Japan.
If any number other than "64" appears, display code No. "64"
next to TIME ZONE by touching [$] / [%].
For details on the area and code No. of time zone, refer to
Appendix at the end of this manual (page 71).
(5) Confirm that [OFF] next to SUMMER TIME is high-
lighted.
If [OFF] is not highlighted, touch [OFF] to highlight.
(6) After the settings are complete, touch [OK].
The setting becomes valid, and the maintenance menu screen
re-appears.
When you touch [CANCEL], the maintenance menu screen re-
appears without registering the settings.