Filter
Top Products
3-4.Film Loading
14 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
(8) Cut off the front of the package that lies off the cas-
sette with the supplied cutter.
(9) Push the tray to the back until it is locked.
When the tray goes into the back completely, the message
appears.
Then, the message of NOW READING FILM DATA (barcode)
of the film package appears.
After reading the barcode is complete, the film of the calibra-
tion pattern for the auto density correction is discharged.
Pocket
Cut off.
CAUTION
Put the cutter after use into the pocket on the
right-front of the tray for storage.
Film data reading message
CAUTION
If some films are queued, the automatic calibra-
tion is performed, but if no film is queued, the
automatic calibration is not performed.