Filter
Top Products
4-3.How To Operate Maintenance Mode
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 23
(11) Select NEGA/POSI by touching [NEGA] or [POSI].
(12) Touch on the upper part of the screen.
The print preference set screen (3/3) will appear.
(13) Touch the key on the right of the setting item, then
touch the numeric keys to set the following items.
MAX DENSITY : Sets the maximum density of an image.
MIN DENSITY : Sets the minimum density of an image.
Lo : (Not used for the current version.)
La : (Not used for the current version.)
SORTER : Sets the bin in the sorter (option) into
which the film is discharged.
(14) Touch [STORE].
The printing data on the specified page will be queued and the
print page set screen will re-appear.
If the specified page has been already deleted, "PREVIOUS
PAGE ERROR" is displayed.
(15) If there are other data to be printed, repeat from
Step (4) to set the print page.
If you wish to print the data from another diagnostic device,
touch to display the PREVIOUS PRINT screen, and
repeat from Step (2).
(16) To complete the settings of re-printing, touch [EXIT]
to return to the MAINTENANCE MENU screen.
(17) Touch [EXIT] to end the maintenance mode.
When the normal screen re-appears, the data on the specified
page will be printed out.