Filter
Top Products
4-3.How To Operate Maintenance Mode
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 37
• Setting film count preference
Follow the procedure below to set the film count preferences.
(1) Touch [FILM DATA SETUP] on the film count data
screen.
The FILM DATA SETUP screen will appear.
(2) In order to set the film type for counting, touch
[DATA1] or [DATA2] on the right of the film size key,
then touch [$] / [%] on the lower part of the screen
to display a desired film size.
(3) Touch the film type on the right of the film size, then
touch [$] / [%] to display a desired film type.
(4) In order to set the date on which the data is
counted by week, touch the key on the right of
[WEEKLY DATA], then touch [$] / [%] on the lower
part of the screen to display a desired date.
(5) In order to set the date on which the data is
counted by month, touch the key on the right of
[MONTHLY DATA], then touch [$] / [%] on the lower
part of the screen to display a desired date.
(6) After the settings are complete, touch [OK].
The setting becomes valid, and the film count data screen re-
appears.
If you wish to cancel the settings, touch [CANCEL].
CAUTION
• The time at which the film is count each day
is fixed at 23:59:59.
• If you wish to set the date on which the film
is counted to the end of the month, set 31 to
[MONTHLY DATA]. On the month that ends
earlier than 31st, the film will be counted on
the final day of the month automatically.