Filter
Top Products
4-3.How To Operate Maintenance Mode
28 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
(9) Select NEGA/POSI by touching [NEGA] or [POSI].
(10) Touch on the upper part of the screen.
The print preference set screen (3/3) will appear.
(11) Touch the key on the right of the setting item, then
touch the numeric keys to set the following items.
MAX DENSITY : Sets the maximum density of an image.
MIN DENSITY : Sets the minimum density of an image.
Lo : (Not used for the current version.)
La : (Not used for the current version.)
SORTER : Sets the bin in the sorter (option) into
which the film is discharged.
(12) Touch [STORE].
The confirm screen will appear.
If the tray is not selected, the screen for selecting the tray in
Step (2) will appear.
(13) Touch [OK].
The print data in the SMPTE pattern will be queued, and the
maintenance menu screen will re-appear.
Touching [CONDITION SET UP] allows you to redo the print
preference settings. (Steps (4) through (12))
(14) Touch [EXIT] to end the maintenance mode.
When the normal screen re-appears, the film in the selected
tray is transported and the SMPTE pattern is printed out. Wait
until printing is complete.
7 Does not perform the magnification
interpolation. But prints out in the
MAGNIFICATION setting. When
you wish to change this setting, ask
a service person.